Bosch DS7445i Guía de usuario descargar pdf (Pagina 39)

DS7240/DS7220 User's Guide Copyright  2002 Detection Systems, Inc. P/N: 49211C Page 39

PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD

5.17 Delete a PIN

I can perform this function.

I cannot perform this function.

Key Sequence: [#] + [5] + [8]

Description

Use this function to delete PINs. This function

requires the appropriate authority level to delete PINs.

You cannot delete your own PIN using this

function.

Only use this feature under the direction of your

Security Company.

Procedure

1. Make sure that your system is turned Off (Armed

LED is off).

2. Enter a valid PIN.

3. Enter [#] + [5] + [8].

The available user numbers now flash (the

example below shows user numbers 1-6 as

available users). The Status LED continues to

flash.

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

7 8

9 10 11 12

13 14

15 16

Armed Perimeter

Flashing Status LED

1 2 3 4 5 6

Flashing LEDs indicate

available users

4. Enter the user number you want to delete

followed by the [*] key. For example, if you want

to delete User 6, press [6] + [*]. You cannot

delete yourself as a user.

If the user does not exist in the system as set

up by your Security Company, the keypad

emits an error tone.

5. Repeat Step 4 to delete additional PINs or press

the [#] key to exit this function.

5.18 Renew One-Time PINs

I can perform this function.

I cannot perform this function.

Key Sequence: [#] + [5] + [3]

Description

One-time PINs can only be used once to turn the

system off. This function allows those with the

applicable authority level to renew previous One-Time

PINs. Once renewed, the One-Time PIN is again

able to turn the system off only once.

Procedure

1. Make sure that your system is turned off (Armed

LED is off).

2. Enter a valid user PIN.

3. Enter [#] + [5] + [3].

Zone LEDs that turn on indicate the one-time

user PINs that can be renewed.

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

7 8

9 10

11 12 13

14 15 16

Armed Perimeter

Flashing Status LED

1 2 3 4 5 6

LEDs ON indicate

renewable one-time user PINs

4. Press [0] + [*] if you want to renew all one-time

PINs, or enter a user PIN number followed by the

[*] key. For example, if you want to renew PIN 2,

enter [2] + [*].

If you renew all one-time user PINs, the keypad

automatically exits this function. If you renew only

selected PINs, press [#] to exit.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Comentarios a estos manuales

Sin comentarios

Bosch DS7445i Guía de usuario Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i