Bosch DS7445i Guía de usuario descargar pdf (Pagina 7)

DS7240/DS7220 User's Guide Copyright  2002 Detection Systems, Inc. P/N: 49211C Page 7

PART I: INTRODUCTION

3.4 Function Key Sequences

There are a number of functions detailed in this

User’s Guide to carry out various tasks (for example,

adding or deleting PINs, setting the date and time or

testing the system).

Functions are written out using their keypad key

sequences. Many of these functions also have titles.

For example, [#] + [4] + [1] is the System Test

function. To conduct this function, press the [#] key,

followed by the [4] key and then the [1] key.

3.5 System Events

Your system responds to four types of alarm events. If

more than one event occurs, your system sorts them

into one of four groups:

• Fire Alarms (highest priority)

• Burglary Alarms

• Fire Troubles

• Non-Fire Troubles (lowest priority)

Events that are grouped as highest priority are always

sent to the Central Station first.

3.5.1 Fire Alarms

Fire alarms are the highest priority events. When a

fire zone activates, your keypad emits a Fire Alarm

tone. The tone sounds for the length of time

programmed by your Security Company. Evacuate all

occupants and investigate for smoke or fire. Enter a

valid user PIN to silence the alarm.

Make sure that all occupants know the

difference between the Burglary Alarm Tone

and the Fire Alarm Tone.

3.5.2 Burglary Alarms

Burglary alarms are the second priority. When a

burglary zone activates, your keypad emits a Burglary

Alarm tone. The tone sounds for the length of time set

by your Security Company. Enter a valid user PIN to

silence the alarm.

Make sure that all occupants know the

difference between the Burglary Alarm Tone

and the Fire Alarm Tone.

The keypad scrolls through each zone alarm. Press

the [*] key to manually advance the list.

3.5.3 Fire Trouble Events

When a fire trouble (such as a loose wire) occurs,

your keypad emits a Trouble tone.

The keypad displays the SYSTEM TROUBLE

message. See “Check System Troubles” on pages 18

and 40 for more information on determining the nature

of the trouble.

3.5.4 Non-Fire Trouble Events

When a trouble event such as a low battery condition

occurs, your keypad emits a Trouble tone.

The keypad displays the SYSTEM TROUBLE

message. See “Check System Troubles” on pages

18 and 40 for more information on determining the

nature of the trouble.

3.6 How Your System Reports Alarms

Your security system may be programmed to

automatically seize your telephone when sending

reports to your Security Company. Once the report is

complete, the system returns the telephone to normal

operation (check with your Security Company).

Your system makes repeated attempts to send

reports to your Security Company. If your system fails

to report, the keypad signals a system trouble. See

“Check System Troubles” on pages 18 and 40 for

more information on determining the nature of the

trouble.

If your telephone service is interrupted, your

security system cannot send reports to your

Security Company unless it has an alternate

means of transmitting them.

3.7 Check System Status (DS7447i Only)

When the system is off, press the [#] key to show the

current system status. The following messages may

appear:

Message Description

System OK

Indicates that the system is ready to turn

on.

System Trouble!

Press 4 to view

Indicates that there is a system trouble.

See “Check System Troubles” on page 18

for more information on determining the

nature of the trouble.

Zones faulted

Press 0 to view

Indicates that the system has faulted

zones. See “View Faulted Zones” on page

13 for more information.

Table 5: DS7447i System Status Messages

3.8 Logging Out of the System

The system remembers PIN entries for approximately

10 seconds after you stop pressing keys. To log out of

the system, press the [#] key twice.

“Logged Out” appears on the DS7447i Keypad

display.

On the DS7445i Keypad, the Status LED remains on

to indicate that you have successfully logged out.

1 2 3 4 5 6 7 8 9 10 11 12 ... 53 54

Comentarios a estos manuales

Sin comentarios

Bosch DS7445i Guía de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i