Bosch DS7445i Guía de usuario descargar pdf (Pagina 33)

DS7240/DS7220 User's Guide Copyright  2002 Detection Systems, Inc. P/N: 49211C Page 33

PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD

5.8 Turn the System On with No Entry Delay

Description

Use this function to turn the system All On, Perimeter

Only or Partial On without Entry Delay.

Turning the system on with No Entry Delay

eliminates the Entry Delay time on any Delay

zone (for example, the Front Door).

Procedure

1. Make sure that all zones are normal (not faulted).

2. Enter a valid user PIN.

3. Turn the system on using one of the following

methods:

• All On: Press [On] (or enter [#] +[1])

• Perimeter Only: Press [Perimeter Only] (or

enter [#] + [2])

• Partial On: Enter [#] + [3]

The keypad display turns the Armed LED (and

the Perimeter LED On if you are turning only the

Perimeter On).

4. Press the [No Entry] key to turn the system on

with no Entry Delay. The Armed LED flashes

indicating that there is no Entry Delay.

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

1 2 3 4 5 6 7 8

9 10 11 12

13 14

15 16

Armed Perimeter

Flashing Armed LED

If a Delay zone is faulted while the system is

On with No Entry Delay (for example, the front

door is opened), the system immediately

initiates an alarm event. Enter your PIN to

silence the alarm. See “Silence Alarms” on

page 30 for more information.

5. To turn the system off, enter a valid PIN.

5.9 Turn the System On with No Exit Tone

Description

Use this function to turn the system All On, Perimeter

Only or Partial On without any Exit tones.

Turning the system on with no Exit tones

eliminates the tone emitted by the keypad

intended to alert occupants that the system is

about to arm.

This function is useful when you wish to arm the

system, but not disturb the occupants while the

system counts down prior to arming.

Procedure

1. Make sure that all zones are normal (not faulted).

2. Enter a valid user PIN.

3. Turn the system All On, Perimeter Only or Partial

On using the appropriate key sequence. See

Table 10.

For example, press and hold the [On] key to turn

the system All On. Or press the [#] key and then

press and hold the [1] key.

Arming Function To Silence Exit Tone

Press and hold [On]

All On

Press [#], then press and hold the [1] key

Press and hold [Perimeter Only]

Perimeter Only

Press [#], then press and hold the [2] key

Partial On Press [#], then press and hold the [3] key

Table 10: No Exit Tone Key Sequences

Silencing the Exit tone doubles the Exit Delay

time.

4. The Armed LED (and Perimeter LED if turning on

Perimeter Only or Partial On) turns On.

5. To turn the system off, enter a valid PIN.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

Comentarios a estos manuales

Sin comentarios

Bosch DS7445i Guía de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i