Bosch DS7445i Guía de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 54
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
DS7240/DS7220 User's Guide Copyright 2002 Detection Systems, Inc. P/N: 49211C Page 29
PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD
4.41 View Log
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [8] + [5]
Description
Use this function to display system events, such as
alarm events, turning the system All On, Perimeter On
and Partial On and turning the system off. Events are
displayed in reverse chronological order.
Procedure
1. Enter a valid user PIN.
2. Enter [#] + [8] + [5].
The keypad then displays the event and user
information and the date and time of the event.
3. Press the [*] key to view the next event.
4. Press the [#] key to exit this function.
Below is a sample log event entry as displayed on the
keypad:
Sensor Mon Rstl
08:29 11/13/01
Event
Time of Event Date of Event
Sensor Mon Rstl
A1 Zn3 SL
Event
Destination 1
Destination 2
Event Specific
Information
The first line of the log shows the event description.
The second line of the log display alternates between
the time and date of the event and the area, zone
(device), user and communication information for the
event.
The control/communicator displays time in a 24-hour
format and the date in MM/DD/YY (or DD/MM/YY,
depending on setting) format.
The log displays the following characters to
communicate certain information:
Log Display Description
A# Area Number
Zn## Zone Number
Dv## Device Number
Ln## Phone Line Number
Mn# Minutes until Auto Arm Sked
Cd## User Code Number
Op## Output Number
Ks## Keyswitch Number
U## User Number
## Communication Status for
Routing Destinations 1 & 2
- (dash) Destination Disabled
A Aborted
D
Deleted from pending buffer by
panel reset
F Failed
L Local
P Pending
S Sent
Table 9: Log Display Descriptions
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

Comentarios a estos manuales

Sin comentarios