Bosch DS7445i Guía de usuario Pagina 22
- Pagina / 54
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Page 22 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD
4.29 Select Chime Zones
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [6] + [3]
Description
Once you decide how your system responds to Chime
zones, you need to decide which of the zones in your
system are “chimed”.
Use this function to tell your system which zones to
chime. You cannot chime 24-hour fire and 24-hour
non-fire zones.
Choosing which zones to chime depends upon your
security objective. If you have small children, you
may choose to chime zones of entry and exit. Each
time a Chime zone is faulted (door or window is
opened), the keypad responds as programmed.
Procedure
1. Make sure that the system is off (Armed LED is
off).
2. Enter a valid user PIN.
3. Enter [#] + [6] + [3].
The keypad displays all zones that are currently
being chimed (Chime On) and those that are not
(Chime Off), followed by instructions for changing
the current setting.
− Press [0] + [*] to turn off all zones. Press
the appropriate number key (non-24-hour
zones) followed by the [*] key for
individual zones.
− The display scrolls through the remaining
zones. You may continue programming
as many Chime zones as are available.
4. When you are finished, press the [#] key to exit
this function.
4.30 Extend Auto-On Time
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [5] + [1]
Description
Your Security Company can program your system to
turn on automatically. Use this function to delay the
Auto-On time by one hour during the Auto-On Pre-
Alert time.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [5] + [1].
The keypad scrolls through the following
displays:
Auto-On Time
moved to:
HH:MM
MM/DD/YY
To exit,
press #.
4. Press the [#] key to exit this function.
4.31 Change Skeds
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [5] + [2]
Description
Use this function to change the time or date that the
Sked automatically turns the system All On, Perimeter
On, Partial On, off, or operates an output
programmed by your Security Company.
An output can be programmed by your Security
Company to turn on lighting, a pool pump, etc.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [5] + [2].
The keypad scrolls through the available options:
− Push [1] to change All On Skeds
− Push [2] to change Perimeter On Skeds
− Push [3] to change Partial On Skeds
− Push [4] to change Off Skeds
− Push [5] to change Output On Skeds
− Push [6] to change Output Off Skeds
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i
(44 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch APC-AMC2-4WCF Manual de instalación
(62 paginas)
(62 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch AutoDome 600 Series Manual de usuario
(11 paginas)
(11 paginas)
(8 paginas)
(64 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.083 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales