Bosch PIF6..T1.. Especificaciones descargar pdf (Pagina 43)

ECODRIVE Drive Controller DKC02.1

DOK-ECODRV-SSE-03VRS**-WAR1-EN-P • 12.96 Command Diagnostic Messages 4-11

C227 Modulo range error

See functional description of "Modulo processing boundary conditions"

C300 Set absolute measuring

The command P-0-0012, Command ’Set Absolute Measurement’ has

been activated via the employed controller.

C301 Setting Absolute Measuring Not Allowed, Drive Enable

Cause:

The command "C300 Set absolute measuring emulator" has been

started while the controller enable signal was active.

Remedial action:

Terminate the command and de-activate the controller enable signal.

C302 Absolute Measuring System Not Installed

The command P-0-0012, Command ’Set Absolute Measurement’ has

been started without an absolute measuring system being available.

The command can only be executed if an absolute measuring system

exists.

Cause:

1. The command has incorrectly been activated.

2. The connected motor or the external measuring system are not

designed as absolute encoders.

Remedial action:

Ref. 1. Prevent command execution.

Ref. 2. Equip motor or external measuring system with absolute encoder

functions.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Sin comentarios

Bosch PIF6..T1.. Especificaciones Pagina 43