Bosch PIF6..T1.. Especificaciones descargar pdf (Pagina 53)

ECODRIVE Drive Controller DKC02.1

DOK-ECODRV-SSE-03VRS**-WAR1-EN-P • 12.96 Exchanging Drive Components 6-3

Exchange the DKC:

•

Turn off the main switch.

•

Ensure the drive will not be turned back on prematurely.

⇒

Before making contact with the connecting lines and

clamps, wait for the capacitor to discharge for at least

1 minute! Do not begin working with the connecting

cables until then!

•

Detach the connecting lines from the DKC.

•

Remove the screws from the upper and lower portions of the casing.

Remove the DKC from the drive package.

•

Insert the new DKC and tighten the screws.

•

Attach the new DKC according to the machine control plans.

•

Load the parameter file from DriveTop which was saved during the

installation into the DKC.

•

Power up the machine.

Motor Exchange:

•

Turn off the main switch.

•

Ensure the drive will not be turned back on prematurely.

Note: When the motor is exchanged, open connectors from power

connections should be covered with protective caps to protect

against the spread of coolant, lubricating fluid or dirt (adm.

protection level V2).

•

When exchanging mechanisms from the AC servo motor, please

observe the directions from the machine manufacturer.

⇒

Danger of accident due to undesired axis motion. For

servo axis with indirect path measuring systems

through the motor, the absolute position will be lost

when the motor is exchanged!

This is why it is necessary to reconstruct the absolute

position to the machine coordinate system after the

exchange.

• Reconstruct the absolute position for servo axes. Acquire the position

feedback value indirectly through the motor’s own measurement

system.

• Reconstruct the absolute position for the position feedback value

output when the feature "Indirect absolute position feedback value

output" is used.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Comentarios a estos manuales

Sin comentarios

Bosch PIF6..T1.. Especificaciones Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Bosch PIF6..T1..